Back
  1. Computer Hardware
  2. Case Fans

ARCTIC P12 PWM PST Pressure-optimised 120mm Case Fans Black (5-Pack)(ACFAN00137A)

1,490.-
est. delivery in 2-4 days
Key Specifications

  • 200 - 1800 RPM PWM

  • Connector 4-pin PWM Header

  • Dimension 120 x 120 x 25mm

  • Max 0.3 Sone Noise Level

  • MaxAirflow: 56.3 CFM

  • 4-Pin-Socket

  • Optimised for Static Pressure

SKU:#067678 Warranty6 Years by ARCTIC Product No.:ACFAN00137A Short link:http://i.nvade.it/hBA See specifications from the manufacturer

Optimised for Static Pressure

During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

Strong Cooling Performance

Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans.
In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind.

More Efficient Technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
Consequently, we have extended the warranty to 10 years.

200 to 1800 RPM regulated via PWM PST

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM.
In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.


Our coolers have pushed the limits further every year - and all that at dropping noise levels. We have put our utmost effort into innovative technologies and fair prices, what made us well known for products with an unparalleled price/performance ratio. We provide you headroom for over-clocking and guarantee you lowest noise levels at affordable prices.

Warranty

Warranty
6 Years by ARCTIC

Performance

Suitable locationComputer case
TypeFan
Fan diameter12 cm
Supported processor socketsNot supported
Compatible processor seriesNot supported
Rotational speed (min)200 RPM
Rotational speed (max)1800 RPM
Noise level0.3 sone
Maximum airflow56.3 cfm
Airflow95.65 m³/h
Maximum air pressure2.2 mmH2O
Pulse-width modulation (PWM) supportYes
Bearing typeFluid Dynamic Bearing (FDB)

Design

Product colourBlack
Number of fans5 fan(s)
Number of fan blades5
Fan connector4-pin + 4-pin

Power

Power consumption (typical)0.96 W
Voltage12 V
Starting voltage3.9 V
Rated current0.08 A

Weight & dimensions

Width120 mm
Depth120 mm
Height25 mm
Weight145 g
Cable length0.4 m
Package width130 mm
Package depth127 mm
Package height123 mm
Package weight800 g

Packaging content

Package typeBox
Screws includedYes
Number of screws20

Other features

Country of originChina

Logistics data

Harmonized System (HS) code84733080
Others looked at